LumberJocks Woodworking Forum banner

Turning

2K views 11 replies 10 participants last post by  mpmitche 
#1 · (Edited by Moderator)
A friend of mine is selling a large lathe of his for a pretty good price and I am considering buying it. The problem I have is that I have avoided this type of work for a long time because I knew I would become addicted and that I cannot afford it. What I would like to know is just how hard is it to learn and is there a chance I could justify this purchase by making things for friends and family (saving money on gifts) and/or selling a few things like bowls to offset some of my costs? How long does it take to learn and how long to actually make a bowl for instance once you get to that point?
 
#2 ·
Mike, you've asked a ten-million dollar question. I've been turning for about 25 years, and I'm still not sure how to answer it. There are so many variables that it's hard to pin down. Your personal talent, spare time, and available funds all come into play.

I WILL say that turning has given me countless hours of enjoyment and satisfaction, and that I still enjoy it to this day. The initial investment is high but, like most areas of woodworking, you can start simple and add the bells and whistles as you progress. When I started, the modern scroll chucks didn't even exist, and I learned lots of workarounds and adaptations. I've made lots of presents for friends and family, and have even made a little money selling things from time to time. However, the real motivation should be personal satisfaction - the rest will take care of itself.

As for how long to turn a bowl - again, experience changes everything. I can now do an average 6-8" bowl in about an hour, barring complications. When I started, I would poke and stab at it for the better part of a day. You WILL get better with practice. Work for quality, and the speed will follow in time.
 
#3 ·
Mike, I have only been turning for a year or so, but I highly recommend you take the plunge. The great thing about turning is that you can start making decent looking stuff with just a little practice. Of course mastering things like really thin-walled hollow vessels can be a lifetime job. And, yes, the investment for tools and accessories can be expensive. But it is really great to be able to go into the shop with a rough blank, and walk out with a finished project a couple of hours later. (This also makes it great for gifts.)
 
#4 ·
As a new turner, 9 months, the 1st thing I would recommend is joining a lathe club in your area. Members are a great help and there are good deals on tools and lathes at the one that I belong to the members in the club I belong to, Flatland Woodturners in Champaign, IL, are great about helping new turners to get started.
 
#7 ·
There are lots of books and CDs that can help you learn to turn, but nothing beats some face to face instruction. I like to tell people that turning is a "feel thing". When you are holding and handling the tool right, it feels right. An instructor can help you find that right feel.

With just a little instruction you can get started right. You'll be able to quickly make some basic stuff and then you can grow from there.
 
#8 ·
If you can afford it, a lathe is a great thing to have. Myself, I've only had a lathe off and on for about a year and a half. At this point in time, the turnings I've spent the most time on have been sticks. I take a rather large piece of wood that looks like a log. I rough it out so it'll be balanced at the lowest speed. Then I crank it up as fast as it'll go, put on my apron and face sheild and let the chips fly. I have so much fun that before I know it I have a tiny stick between the centers and you can't see my feet for the chips covering them. I have a ball doing it though. I keep saying I'm going to practice and learn to do more. At this point in time though, it's worth what I paid for it as a stress reliever. No plan. No skill. No expectations. Just flying chips and a smile on my lips.
 
#9 ·
I've been turning for a while. It's like instant gratification. Like the others said , take a woodturning class somewhere. I have never sold any turnings. I give them all away. Mostly for fundraisers at church. Christmas gifts. I just enjoy doing it so much. That and doing scroll saw work. It's a stress reliever for me.
 
#10 ·
You can make money turning. There's demand for turned parts and many
cabinet shops lack the skilled staff to do it in-house.

Look around your local market at houses. Depending on your area you
may see a lot of need for restoration turnings for exterior woodwork, or
very little. People with old houses are over a barrel because they need
the new turnings to match the extant ones. That's a market for you.

Pens and turned boxes make appealing gifts, are easy for you to carry
to shows, mailable, and a low-enough price point that you can get more
impulsive sales.

There's a market for turned work. Getting accurate and efficient at it
takes considerable practice, which is why there's work for skilled turners.

A lot of getting good at it is learning to turn clean enough you don't
have to do a lot of sanding. Sanding is a time-sucker and clients buy turnings
by the piece, not by your time invested. A lot of the guys turning burls
are spending so much time sanding and polishing the darned things they
can't make much money at it because they have to price the work like
fine art - for which there is a market, but tough to crack and competitive.
 
#11 · (Edited by Moderator)
Mike, MUCH good advice above. With the lathe alone, I've paid for itself twice over, and then some with just pens.

Yes, take the plunge, but which lathe? The ONLY down side I see is that it is a BIG one. You can turn surprisingly large bowls and vessels on a mini or midi(like the new Deltas). I avoided lathes for years because every big one I saw in a guy's shop sat in the corner, took up a lot of space and they never used it. Imagine taking your lathe with you to visit a friend. That's some REAL advantage to some. Being able to put it out of the way on a shelf for a few weeks could be really helpful too.

Not trying to convince you OneWay or another(pun intended, ha ha). Just bringing up a point. I wish you much success and happiness wichever route you take.

Edit: Owning a Big lathe(to me) is like owning a boat. You don't want to own it, you just want to use it once in a blue moon. Make sure you have a good friend with one on the rare occasion when you really need it. Do you really need a big lathe ALL the time?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top