LumberJocks

Reply by Loren

  • Advertise with us

Posted on How do I cut this joint with a compound angle?

View Loren's profile (online now)

Loren

10243 posts in 3610 days


#1 posted 01-12-2011 11:13 PM

I wouldn’t recommend cutting such a joint with machines unless
you have a multi-router or similar machine. The tricky part is the
tenon shoulders. For just a one-off piece, I’d cut the joints by
hand personally. It’s not really that hard.

A loose tenon would be plenty strong two, as suggested, but
making the hole at 4 degrees is a complication as well without
a multi-router type jig, Leigh FMT type jig slot mortiser with a
tilting table.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com