LumberJocks

Reply by canadianchips

  • Advertise with us

Posted on Link belt width question

View canadianchips's profile

canadianchips

1831 posts in 1630 days


#1 posted 1330 days ago

The width of the belt is important. You do not want the belt running too low in the pulley. It will slip if to low and bottoms out. The belts need to run Flush with the top of the pulley for better performance. Running higher or lower will actually change the speed of the machine you are using ! I have attached a little “rough sketch” showing what I really mean. I had my own SEED cleaning equipment on my farm, so I did get to learn about belts and pulleys the “hard way !”
Personally I would use a V belt over a link belt anytime !

-- "My mission in life - make everyone smile !"


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase