Reply by Kjuly

  • Advertise with us

Posted on Minimum Laminate Radius

View Kjuly's profile


308 posts in 3248 days

#1 posted 01-06-2011 03:50 PM

Hi Greg,
Heating the laminate is pretty easy but do a few test runs on scrap material because you can over heat it and end up with bubbles and cracks. As mentioned above….keep your heat gun or hair dryer moving.
A trick is to use paraffin wax as a heat indicator. Using the wax, make short lines spaced about an inch apart, the length of the bend.
As you apply the heat, the melting wax will give you a good indication on your progress.
Mineral spirits will easily clean off the wax.

-- Keith, Charlotte, MI

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics