LumberJocks

Reply by IrreverentJack

  • Advertise with us

Posted on Craftsman Table Saw Model # 113.29940

View IrreverentJack's profile

IrreverentJack

724 posts in 1568 days


#1 posted 11-05-2010 06:02 AM

Justin,

Your saw is a bit different from my contractor saw. The design is similar but the contractor saw has table extensions and maybe a larger table. The switch on my saw mounts under the front rail. The rating would be up to a 2hp motor (with 110v or 220v). I don’t know if you could upgrade your switch without modifying the case unless you abandoned the stock switch and went with one mounted externally.

It is always better to measure, so you know you are getting the right parts. The manual says both pulleys are 2 1/2”x5/8”, but I would check . -Jack


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase