LumberJocks Woodworking Forum banner

How to Resaw using a Chainsaw

9K views 9 replies 9 participants last post by  8iowa 
#1 · (Edited by Moderator)
I've been given two large Pecan logs and, unfortunately, the only sawmills in my area want half the lumber to cut it. Has anyone made a jig for resawing using a chainsaw?

Thanks in advance.

Philip
 
#5 ·
If you have a hefty chainsaw, the Granbreg mill that Bob posted works well. I use that exact model with a Stihl 660. Be advised that it is a lot of work. Not that that's bad, mind you, just wanted to mention it.

The best of both worlds, imo, is to use the chainsaw mill to take the logs down to pieces you can manage on your bandsaw.
 
#7 ·
That looks like one of those tasks where you wouldn't mind falling on the saw when you're done. Just to end they misery.
haha, mot it sounds like you have some experience with hickory (all pecans are hickory, not all hickories are pecan) They don't rip/mill without a fight. Start with a $700+ chainsaw head, buy a spool of ripping chain and the "chainsaw mill" attachments….then work your butt off.
Good luck and have fun .
 
#9 ·
Why don't you contact the man that was going to saw these logs for you and tell him you will pay twice the sawing fee and you keep all the wood. You would probably save quite a bit of money and the time you would save by not being in the hospital with a broken back is priceless.
 
#10 ·
Check the phone book. Look for someone who has a Woodmaster portable bandsaw. I have a guy who will come to my place and saw the logs to my specifications, and it is not expensive - nor do I have to find some way to get heavy logs to a sawmill.

Even the portable bandsaw, with it's 1/8 inch kerf, generates a huge pile of sawdust. A chainsaw would be much worse, representing many board feet lost to dust.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top