Reply by DrJosh

  • Advertise with us

Posted on A question on resawing

View DrJosh's profile


50 posts in 2862 days

#1 posted 10-20-2010 12:18 AM

Hey gents:
First off, thanks for all the good advice and suggestions concerning resawing. I haven’t yet had the time to build a resaw fence for my Jet 12” bandsaw, but I did purchase a good 1/2” 3 tpi, skip tooth blade by Timber Wolf. I installed the blade and went through all the tune up procedures. I did a few test cuts and, I must say, I am very pleased with the power of the saw and quality of the blade. I was able to resaw 7/8” oak with no problem. I just drew a center line and resawed freehand. The thinner boards would still need a quick pass through the planer, but otherwise a great cut. I’ll post agian once I build the fence and test try it out.

-- Nashville, TN

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics