LumberJocks

Reply by Walt

  • Advertise with us

Posted on Hinges and MDF

View Walt's profile

Walt

246 posts in 2836 days


#1 posted 10-14-2010 01:59 PM

Pie: I will post the project tonight. It is a 24 in wide 31 in long and 13 1/2 Inch high box. Inside the box I have mounted a Twin window fan. Behind the fan will be two 12×24x1 furnace filters and one will be in front. The box is made out of 3/4 MDF the filters are held in tracks made from 3/4×3/4 plywood strips. Currently the project is upside down. when mounted to the ceiling the bottom will be open to change filters. The plans I had called for a sliding bottom that was in a 1/2 in dado. I did not think that the MDF would hold up sliding so I have decided to mount a hard wood strip on the bottom edge and place a hinged plywood bottm so I can not only change the filters but clean the fan when needed. I plan to hang the filter from the ceiling on chain to reduce any vibration.

-- Walt Wilmington Delaware, http://waltlumley@yahoo.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com