LumberJocks

Reply by DylanC

  • Advertise with us

Posted on Delta 46-250 lathe, where to buy parts

View DylanC's profile

DylanC

200 posts in 2452 days


#1 posted 11-28-2015 05:27 AM

+1 for Mr. Unix’s recommendation. If you’re in a big hurry and can’t wait for wrenches, you might be able to take a piece of hardwood a bit over a foot long and drill two holes in it and press a couple of bolts through the holes. Bolts should be as large as you have on hand that will fit through the holes in the face plate. When done it should look something like the pic below (I’d call it a spanner wrench), but all in a straight line and made from wood. Hold the spindle stationary and use your new “wrench” to remove the faceplate.

Two things to note with this: First, take care not to ding up the faceplate. Second, this won’t work if you have a work piece attached to the faceplate, so you’ll need the wrench eventually.

-- Dylan C ...Seems like all ever I make is sawdust...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com