LumberJocks

Reply by grizzman

  • Advertise with us

Posted on Planer Question

View grizzman's profile

grizzman

7836 posts in 3509 days


#1 posted 09-28-2010 07:25 PM

if you have grooves then there are chips or places on your knife blades that have hit metal…they will have to be taken out and re sharpened…snipe is common in these machines…unless you have an extended in feed and out feed table you will probably always have snipe…you can adjust your rollers to make it minimal but you will still probably get some snipe…yes your boards coming out should be very smooth…your knives are the one that control that…and the fact that your board twisted to one side going in..usually means your knives are dull and need to be resharpened…i hope i could help you some…grizzman

-- GRIZZMAN ...[''''']


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com