Reply by Gregn

  • Advertise with us

Posted on Help - Sliding doors

View Gregn's profile


1642 posts in 3009 days

#1 posted 09-21-2010 03:02 PM

You can make the rails for the cabinet doors to use without any hardware and cut rabbets in the back and the top and bottom and wax them good so they will slide easy. You can also make them to fit the full thickness of the doors to set in the rails and install rollers on the bottom to allow them to slide easily. Otherwise you could just buy the hardware systems and do it that way as well. The ones I built for a guy I put the rollers on the bottom and it worked good. I made the rails from Oak which worked well. Oh ya the rollers were only a couple of bucks a piece, so you get change back from that $20.

-- I don't make mistakes, I have great learning lessons, Greg

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics