LumberJocks

Reply by bonesbr549

  • Advertise with us

Posted on Kitchen farm table progressing

View bonesbr549's profile

bonesbr549

1445 posts in 2902 days


#1 posted 11-12-2015 05:10 PM



Thanks for the compliments. I can t take credit for the legs though, I purchased them through mail order because I don t have a lathe.

I like the idea of the stopped sliding dovetails, it does make me a bit nervous since I have never done them before so I may chicken out and do dowels.

How hard is it to do a sliding dovetail in the middle of a long board?

I was thinking is 2 cross bars, one every 2 feet.

- MashMaster

Dive in, get some cheap poplar to practice on. If you have a router table cut the dovetail in the side first. Then put the dovetail bit in your table and take a pass against one side of the crossmember, and flip it and do the other side. Keep exposing a tiny bit of the bit and repeat proceedure. Test fit and once its snug your there. I’ve got the incra fence so i can adjust my fence by the thou. As Charles Neil says “sneak up on it”

Practice on some poplar then do the real thing. TNT (TaintNuttinToit)

-- Sooner or later Liberals run out of other people's money.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com