LumberJocks

Reply by timberframedave

  • Advertise with us

Posted on Dust collector, cyclone/blower only, no filters, vent outside, can't find vendor

View timberframedave's profile

timberframedave

20 posts in 2982 days


#1 posted 09-15-2010 04:58 PM

I am planning the exact same design for my shop.
There are tons of accessory options for individual parts at: www.oneida-air.com

I would like to build a small shed off the back of 2 car garage – large enough for the cyclone dust collector & air compressor. The intake port of the dust collector will punch through the rear wall of the garage & connect to overhead snap-lock pipe. The exhaust port of the dust collector will exit the shed & run through 10’ of piping – into a stand a trees. This will same some valuable floor space inside the shop & cut down on interior noise.

  • install a manual stop/start switch on rear wall of shop
  • empty sawdust/chip drum at end of each day – while draining down the air compressor tank water (using 1/4” ball valve threaded onto base of compressor)

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com