Reply by bobdurnell

I’m a fan of that Gorrila glue stuff. Mainly bacause of the open time, having only to spread the glue on one surface, and water on the other, and its real easy to sand off after it has dried. I have used Titebond III also. I have used the old standby Weldwood Plastic Resin. Practically all of the adhesives will work, however when in doubt I use good ol West Systems Epoxy. I kinda stay away from that two part Resorcinal stuff though. Most of my clamps have a deep red color on them since. Hope this helps.

-- bobdurnell, Santa Ana California.