Reply by wseand

Make a clamping jig, you will need a lot of compression to make sure you get a good bond between the two. Unless you have a lot of clamps I would make a jig to hold Either (4” x 8’) or (8” x 4’). Be prepared for a lot of gluing and I would invest in a T&G router bit, but certainly not necessary. Everything else on your end looks good.

I am certainly no pro but this is what I would do. You should do a little more research and some trial runs prior to investing a lot of time and money into it.. Just because this has worked for me in no way will it mean it will work for you.

-- Bill - "Freedon flies in your heart like an Eagle" Audie Murphy