Reply by Kent Shepherd

  • Advertise with us

Posted on Router table fence help.

View Kent Shepherd's profile

Kent Shepherd

2718 posts in 3492 days

#1 posted 06-29-2010 08:15 PM

I do agree with using a sled, but if you want to set up your fence like you asked, here are the pictures I promised. I start by measuring the distance from the fence to the miter slot in the center. You need it as close as possible to being set right with the bit

Then measure each end and set the fence as straight as you can.

Clamp a piece like this to the miter gage and set it against the fence in the middle by the bit

Then move side to side in the slot. When it’s right, it will barely touch at every point. Adjust the fence as needed. This should just takes a few minitues. The biggest issue will be having the fence right to to bit. You may have to tweak it.

Hope this helps you


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics