LumberJocks

Reply by Michael Murphy

  • Advertise with us

Posted on Any idea how to cut recess

View Michael Murphy's profile

Michael Murphy

453 posts in 2877 days


#1 posted 06-18-2010 08:57 PM

I have in the past done larger coves on the tablesaw by carefully guiding the workpiece across the face of the sawblade and then raising it up a bit at a time to increase the depth of the cove. The final product needs scraping and sanding to get the lines out but it works. The only hard part on that application would be the gradual start and stop of the shape.

Maybe you could get a Cove raised panel bit from mcls or other manufacturer, with a bearing or rub collar that would do the trick and not cost an arm and leg.

-- Michael Murphy, Woodland, CA.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com