LumberJocks

Reply by sandt38

  • Advertise with us

Posted on Cutting a circle with my router?

View sandt38's profile

sandt38

166 posts in 1505 days


#1 posted 1504 days ago

Router Jig

I use a scrap piece of luanne (some people recommend plexiglass, as you can see right through it) and screw it to the router
. I measure 1/2 of the necessary cutout diameter, and set it from the OUTSIDE edge of the bit to the marked point. Now, I drill a 1/4 inch hole through the luanne and the workpiece. Cut 1/2 an inch through the wood, place tape over the cut side, flip the board and cut the rest of the way through.

-- Got Wood? --- Somewhere along the way the people in Washington forgot that they are there to represent the people, not to rule them.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase