LumberJocks Woodworking Forum banner

How many routers in your shop?

6K views 75 replies 65 participants last post by  rasp 
#1 · (Edited by Moderator)
When I talk to fellow woodworkers I find that most of them have at least 2 routers and many of them have more than that.

I have 4: a light weight trim router, a medium weight plunge router, a heavy duty plunge router and a medium weight fixed base router that remains on the router table all the time.

Also - I prefer to use bits with 1/2" shaft whenever possible, but I have collets for both 1/4" and 1/2" for the 2 medium weight routers and the light weight only accepts 1/4" and 1/8".

I'm curious about how many routers other woodworkers have.
 
#2 · (Edited by Moderator)
Rich: I just have two routers, Both Porter Cable. I use the 690 hand held in my dovetail jig. The 893 goes in my overarm pin router.

Now that I have the 10,000 rpm Shopsmith speed increaser, I'm using it in shaper mode rather than use the router table. It can take 1/4" and 1/2" router bits as well as shaper cutters.

Hey. The weather here in the U.P. has been fantastic.
 
#3 ·
I have a friend who is professional woodworker … he told me once he had 13. He has each one set up with a specific bit for specific cuts and profiles. To him, time is money, and he can justify the expense.

I have four … a Ryobi laminate trimmer, a Skil plunge router, a PC6902 in the Bench Dog router table, and a PC694VK kit with both the plunge and fixed base.

The Ryobi (1/4" collet) is used mostly for roundovers and chamfers. The Skil (my oldest router) is also 1/4" collet and pretty much never gets used.

The two Porter Cables, on the other hand, get a lot of use. They both have 1/4" and 1/2" collets, but I never use the 1/4" collets in them … like you, I prefer 1/2" shank bits. They cut smoother, and I think they are safer.
 
#4 ·
Until I have one of every tool I need I probably won't have two routers. I got a DeWalt 3 base combo so I have one mounted to my router wing on my table saw. Then a separate fixed and plunge base. I don't do production work or rails and stiles every day so I can set the router up for each task. This topic has been brought up before and plenty of people on here have more than 5, 10 and 15 routers.
 
#5 ·
8iowa - I wish you well with the Shopsmith speed increaser. I had one and the gears busted up when I subjected them to (what I considered) moderate stress. This note is to suggest that you not push your shopsmith too hard.
 
#7 ·
Right now I have 3.

2 Hitachi KM12VC fixed / plunge base 2.25 HP kits. One fixed base is on my router table.
1 B&D Firestorm FS1200RP, which works amazingly well, but has parts fall off of it frequently enough I am scared to use it. I want it GONE…

I am wanting to get rid of the B&D, and get a 3+ HP router for the table. I am thinking another Hitachi. Every Hitachi tool I have bought so far has been a hard worker, and down right pleasant to use….

I used to have a small 1.5 HP Ryobi fixed base that spun 1/4" shank bits that I somewhat regret getting rid of. But my Hitachis have both 1/4 and 1/2" collets…
 
#9 ·
One Porter Cable 2-1/4 HP with two bases, fixed in the table, plunge used freehand.

However I've switched to using a couple of plough planes and a router plane for most groove, rabbet and dado tasks in SMALL workpieces. Once I figured out how to use the joinery planes they seem safer to me than pushing small parts around on the router table.

But I still enjoy using my router, especially mounted in the table for things like pattern routing or running long lengths of molding or frame-and-panel doors. I know how to do them by hand (and sometimes do it by hand) but the router is generally faster. I work them by hand if I don't have the right profile bit, don't want to buy another bit or just need to tweek the look I'm getting from the router bits. That way it doesn't look like what everybody else produces since they have the same profiles!
 
#12 ·
QuangFromCalgary. Is my math goofy or what?
"Got four too. One 2 1/4 triton router, 2 Mastercrafts routers , 2 Bosch trim router"

1+2+2=5 last time I looked…

Seriously though. Since I got rid of my little Ryobi, I have been wanting a trim router. Is that Bosch easy to use? I am in the air between the Bosch and DeWalt…
 
#13 ·
Does a drywall cutout tool count. I set it up on an adjustable carriage for fine work until I picked up a trim router. The final answer is four plus the cutout tool. They all have their own uses and all work well.
 
#14 · (Edited by Moderator)
Rich,
I have 3 but only use 2 of them. I am just one of those guys than can't get rid of tools. I still have my first router I bought back in about 1988. It is Black & Decker fixed base and I think it is 1-1/4 hp I haven't used it in a long time but it still works. After that I have PC 2-1/4 hp setup with plunge base it also has a fixed base but I don't really use it. And, then there is the big boy for the table the PC 3-1/4 hp.

Well, I guess if you want to count the little guy I have 4 - the little guy is a Dremel in router base.
 
#15 ·
I have four routers. A Dewalt 2 hp plunge router, Craftsman 1.5 hp fixed base that I keep a dovetail bit on, a second Craftsman that is mounted under a router table and a Roto Zip trim router. Both Craftsman routers are at least 25-30 years old and are still going strong.
 
#17 ·
Greetings Rich,

I have four: 2 Hitachi M12Vs @3 1/4 hp. One is set up in my router table, one is hand-held. ...Love these routers. A Ryobi 2 1/4 hp that my son gave me years ago for my b.d., which is s plunger, and a small DeWalt trim router I use on laminante. It's only takes 1/4" bits, but this little dude gets the job done. My favorites are the Hitachi M12 V's….... you just don't bog them puppies down, not with variable speeds…..get one…. lol.
 
#18 ·
I have, uhm, let's see, 5. Yep, 5.

2 Craftsman routers with bench tables, but only 1 ever gets used anymore. A Ryobi that I use for dovetails, though, that may be changed soon, as I just acquired a Bosch with a 1/4" and 1/2" collet, so I may start utilizing that a lot more.

The one I use the most, believe it or not, is my Bosch trim router. I do a lot of small routing things on the job sites and it travels really nice.

Of course, I could count my Dremel, but I won't.
 
#23 ·
5in total: 2 Triton's (one of each size the smaller in my router table) a Craftsman in the horizontal router table, a Skil plunge router with Milescraft base plate for sign making, and a small Harbor Freight trim router. For smaller projects I use a Master Carver flex shat from Woodworkers Supply' for even smaller projects I have a 400 rpm Turbo Carver that uses dental size burrs.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top