LumberJocks

Reply by Paul

  • Advertise with us

Posted on Ridgid R4511 table saw questions

View Paul's profile

Paul

347 posts in 2277 days


#1 posted 05-03-2010 05:41 PM

I finally took the herculift assembly off and threw it away in a fit of frustration. I put the saw on a mobile base that I had from another tool and it is fine now. I am sure there is a way to tune up your lift but the directions leave much to be desired.
Otherwise I am pretty happy with the saw, one difficulty is tilting the blade to 45 degrees, it seems to bind up at about 43 degrees and I need to torque it pretty hard to get to 45 even though I’ve adjusted the stop bolt several times. I think there is still something I’m not understanding, maybe I will start another thread and see if anyone else has the problem.

Paul

-- If you say 'It's good enough', it probably isn't.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase