LumberJocks

Reply by MyFathersSon

  • Advertise with us

Posted on Do I need a new router table plate

View MyFathersSon's profile

MyFathersSon

180 posts in 1918 days


#1 posted 1567 days ago

I remember a thread just like this on another site a couple of years ago when i bought my first insert.
Conclusion there was just what you read—
That the ever so slightly convex top is an intentional design feature of the Rousseau plate intended to insure that your workpiece was resting solidly on the plate at the point the workpiece met the bit.
Whether this was a GOOD decision as opposed to a perfectly flat plate—was an issue they never came to agreement on.
The inserts not sitting flush with the top of the plate is a whole different issue. As another poster said – you may need to press them in a little tighter. If that still doesnt work – there may be a defect.

-- Those who insist it can't be done - should politely refrain from interrupting those who are doing it.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase