LumberJocks

Reply by jsheaney

  • Advertise with us

Posted on How do I adjust hinges on small boxes

View jsheaney's profile

jsheaney

141 posts in 2678 days


#1 posted 11-21-2007 03:02 AM

Thanks to everyone for the suggestions and tips. I guess I’ll plug up those holes and try again. I’m going to take some careful measurements and see if my mortises are off. I did them by hand, but I used a good marking gauge to set up all the lines and my 3/4” chisel is exactly the width of the hinge. My suspicion is that the hole placement is my downfall. They are tiny screws and my 1/16” bit was hard to keep still, even in my drill press. I’ll use the tips here to make a plan and let you know how I do.

Thanks.

-- Disappointment is an empty box full of expectation.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase