Reply by jlsmith5963

  • Advertise with us

Posted on Need input on Lego League competition table

View jlsmith5963's profile


297 posts in 3373 days

#1 posted 02-07-2010 01:41 AM

This might sound a little wacky but you could maybe use these foam tiles, supported by an unglued interlocking grid, using half-lap joint, of 3/4 plywood. The spacing of the half-lap should be short, maybe 6”, so the mats would span the grid. Make the last pieces taller on the edge to replace the 2×4 edging. Assemble the mats and then cut them to fit grid. The whole thing would break down to a series of 3/4×4 by 8’ and 3/4×4 by 4’ pieces (plus the 4 wider ones for the edging) and then the mats and a couple of saw horses. If it isn’t clear I could draw it in sketchup.

-- criticism: the art of analyzing and evaluating the quality of an artistic work...

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics