LumberJocks

Reply by PurpLev

  • Advertise with us

Posted on Need help with a mallet design

View PurpLev's profile

PurpLev

8476 posts in 2274 days


#1 posted 1672 days ago

glue can be any wood glue such as titebond (I, II, III) Elmers yellow glue, or similar. I use Titebond I mostly.

Oak should be ok for the mallet, and the head should be hefty, usually if you’ll laminate 3 layers of 3/4” you’ll get a rough width of 2 1/4” for the head. rest of the measurements are really personal, and are up to you to choose, just make sure it has some weight to it. 3×5 is a good size, but draw it out and see how it looks/feels to you.

and most important – welcome to Lumberjocks! :) sounds like you are one already.

-- ㊍ When in doubt - There is no doubt - Go the safer route.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase