LumberJocks

Reply by pete57

  • Advertise with us

Posted on How to Dry Green Turning

View pete57's profile

pete57

134 posts in 2133 days


#1 posted 01-05-2010 09:41 PM

I have taken 16 inch wide used plywood and made a kiln for drying spindles and chair parts. It is 4’ X 2.5’ X 16” D with back and the 2 sides solid and the front is a piece 4’ X 2.5” cut at 6” where the 6” is at the bottom and the hinges are at the top to make a hinged door. I put weather stripping around where the door closes and a cleat in the bottom 6” piece for the door to close against weather stripping. In the top (inside) I put three electrical boxes with one bulb porcilien holders and three lampshades that clamp on the bulbs covered in renolds wrap that are turned on by a switch. The bulbs are 1-100W 2-75W and that keeps it up to between 90 and 120. I have green crest in a form ready to work and install in 4 days. I got the plan from my mentor, but drew langsner has sevral plans in his book” The Chairmaker’s Workshop” which is like mine and plans for a bigger one. Just a thought

-- Humble Wood Servant


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase