LumberJocks

Reply by DaleM

  • Advertise with us

Posted on Tablesaw Blade 101

View DaleM's profile

DaleM

913 posts in 2036 days


#1 posted 12-25-2009 06:46 AM

Which way are you talking about cutting on a sliding miter saw? The only way you can have a climb cut is if you start the cut with the saw pushed all the way in, then pull it towards you, which is the exact opposite of the way I use the saw. I may be wrong, but I thought the point of the negative hook angle was so the hooked teeth wouldn’t grab the wood and lift it off the table surface, which I’ve had happen before with a positive angle, nothing to do with a climbing cut. With a negative angle, when you are pushing, not pulling, the saw towards the wood, the saw will not have the tendency to lift the wood from the saw table.

-- Dale Manning, Carthage, NY


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase