Reply by seearran

  • Advertise with us

Posted on question about shelf pin holes

View seearran's profile


5 posts in 3144 days

#1 posted 12-09-2009 11:03 PM

A cheaper method which I employ is to use a length of 9mm or 12mm MDF cut to the width of the cabinet sides which have been drilled with diameter of shelf pegs studs. You can suit the spacing to your own requirements; the board is then placed against cabinet side and clamped and drilled through MDF into side using a block of timber on drill to act as stop. Lip and spur drill bit best.

-- ian,troon,scotland,

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics