Reply by frank

Hi Leon;
I have had this happen to me after breaking the blades before and the wheel goes cockeyed from the sudden release of tension. Look to where you adjust the tension on the blade at and see if your wheel won’t pop back into place. Sometimes you have to back out the tension nut some more till you get a good amount of play in the wheel and then it will go into place.

Just some two cents thoughts….and I all-ways look for the simple explanations first, as there is not much to go wrong in that area of the bandsaw.

Thank you.
GODSPEED,
Frank

-- --frank, NH, http://rusticwoodart.tumblr.com/