Reply by CypressAndPine

  • Advertise with us

Posted on Grizzly Bandsaw G0555

View CypressAndPine's profile


62 posts in 2008 days

#1 posted 02-05-2015 06:33 PM

I see what you are talking about not being able to extend the bearing out any further. Something appears to not be lined up correctly. This is probably why you can’t get your fingers in there also. The shaft that the bearing is on shouldn’t be extended all the way out like that. It looks like you are at the end of your stroke and still not close enough to the blade.

Is your blade centered on the wheels?

Are you 100% positive the table is mounted correctly?

I recommend that you remove the table again and check if there is any way to adjust/move the entire blade guide assembly closer to the blade. Something is not right here. Hopefully it is a simple fix.

-- Cypress Jake, New Orleans

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics