LumberJocks

Reply by RobS888

  • Advertise with us

Posted on Grizzly Bandsaw G0555

View RobS888's profile

RobS888

2482 posts in 1960 days


#1 posted 02-05-2015 06:17 PM

Rich,

Are you loosening all three bolts?

The wing nut and the knurl adjust distance front to back as mentioned.

The allen bolts adjust lateral position against the blade. One has to loosen the bolt on the side then one can camber the bearings by rotating the bolt in the center of the bearing. The bearing should move with the bolt, since you are also moving its mount.

-- I always suspected many gun nuts were afraid of something, just never thought popcorn was on the list.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com