LumberJocks

Reply by kimball

  • Advertise with us

Posted on Complementary Template Routing

View kimball's profile

kimball

323 posts in 2043 days


#1 posted 10-01-2009 07:34 PM

I am not familiar with your project per se. I do have some thoughts on pattern routing that I would like to share with you though. First, If you get overly agressive with the solid carbide up cut spiral bet, it will snap and possibly cause an injury. Second, If it doesn’t snap, it may have some serious run out.

That aside, I prefer to use 1/2 inbch shanked patternmaker’s bits (bearing ont the top) or flush cut trim bits (bearing on the bottom. They can be resharpened and they won’t snap if you dont bandsaw close enough to your line (1/8” is about the norm).

Good luck,
Kimball


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase