LumberJocks

recycle1943's Blog

  • Advertise with us
This blog is written by recycle1943 | 26 entries so far

Latest Entry

stupid is as stupid does

05-18-2016 03:32 PM by recycle1943 | 6 comments »

Without getting into details I found today that you CAN drill a larger hole in a hole using a larger forstner bit.I had previously drilled a 1/2” hole thinking it would allow plenty of clearance for sliding up and down freely on a 7/16” dowel rod. NOT !! I should say that the piece to be sliding was about 7” long with a hole on each end to accept the dowel rod. Nothing precise just wanted it to be smoother. Solution without starting over ? I put a champfer on the top and bottom of the existing hole which opened the drilling area up. I then selected the forstner bit, a 5/8” and centered it on the existing hole. I then brought the drill press fence up tigh...

Read this entry »

Older Entries

View all 26 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com