LumberJocks

First Project With the New Powermatic Table Saw #29: Slab water has been layed

  • Advertise with us
Blog entry by psient posted 03-14-2013 04:24 PM 1096 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 28: Electrical pull Part 29 of First Project With the New Powermatic Table Saw series no next part

I’ve installed, hooked-up, and backfilled the water to the slab. The images are below. Today I’ll make-up my 125 amp sub panel and energize the slab electrical.

located the main
Put in the 2” shut-off and anti-siphon valve for the 1” feeder line. Note the compression fitting and slip/slip Tee!
Ran the feeder line to the slab. The gray pvc is my driveway gate electrical line. I’ll vault this shut off and move the gate line out of the way.

Installed the 1” shut-off and a garden valve, then ran the water line to the slab connection shut-off.


Pressure tested the whole system, installed a buried vault for the main shut off and backfilled the whole sh#teree.



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase