LumberJocks

Rolling Workbench

  • Advertise with us
Project by Eric Genzlinger posted 04-10-2014 08:52 PM 2602 views 7 times favorited 9 comments Add to Favorites Watch
Rolling Workbench
Rolling Workbench No picture No picture No picture No picture No picture
Zoom Pictures

I have a one stall garage and a motorcycle and lots of Kids’ toys. I needed a workbench I could roll in and out of the garage and it needed to carry everything I use often. It is 2 feet deep and 8 feet long. Work space is 2X6 and my tablesaw sits on the end. Under my saw I have a dust collection chute that drops into a bucket. There is a shelf for my organizers (wal-mart special). On the back I have a 4 ft power strip connected to a reeled ext cord. In the future, I am going to mount my router under the left end and install my t-track system.

-- Emotions are like farts. There is a time and place to let it out. But don't keep it bottled up too long.





9 comments so far

View AndrewT's profile

AndrewT

15 posts in 525 days


#1 posted 04-10-2014 08:58 PM

What size casters are underneath and how many?
I could use something like this just to move around the mess I call a garage :/

-- If we could just get everyone to close their eyes and visualize world peace for an hour, imagine how serene and quiet it would be until the looting started.

View sawdustjunkie's profile

sawdustjunkie

212 posts in 440 days


#2 posted 04-11-2014 12:42 AM

Looks good.
You should consider putting a small lip on the sides, so your plastic containers don’t fall off and drop screws all over your driveway.

-- Steve: Franklin, WI

View doubleDD's profile

doubleDD

2663 posts in 766 days


#3 posted 04-11-2014 02:23 AM

Definitely a great solution for cramped space. Next will be a rolling shop.

-- --Dave, Downers Grove, Il. When you run out of ideas, start building your dreams

View Eric in central Florida's profile

Eric in central Florida

3665 posts in 2298 days


#4 posted 04-11-2014 03:03 AM

Great job Eric.
Everything “at the ready” !
Nice work !

-- All glory comes from daring to begin.

View jackthelab's profile

jackthelab

307 posts in 1415 days


#5 posted 04-11-2014 12:04 PM

Like the design!

-- Dave in Minnesota - If it ain't broke, improve it!

View Notw's profile

Notw

121 posts in 476 days


#6 posted 04-11-2014 12:27 PM

looks well thought out, I can relate to the single car garage and being limited on space.

View PaulHWood's profile

PaulHWood

127 posts in 975 days


#7 posted 04-11-2014 12:47 PM

Nice work.

I am thinking a 10hp engine, and you can drive it in and out of the garage

View workerinwood's profile

workerinwood

2710 posts in 1790 days


#8 posted 04-11-2014 01:28 PM

Very nice, great job!!

-- Jack, Albuquerque

View NormG's profile

NormG

4402 posts in 1726 days


#9 posted 04-12-2014 12:20 AM

What a great work station. Just move outside and you have a very large work space

-- Norman

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase