|Project by steve_in_ohio||posted 04-10-2014 02:40 PM||1654 views||3 times favorited||4 comments|
This is a some simple clamp racks that I made to hold all of my clamps instead of clamping them to my bench. They are made from some 1/4” plywood and some 2×4’s that I had sitting around. I measured the width of each clamp and marked it out on the plywood and used my band saw to cut out the slots. The plywood is just screwed to the top of the 2×4 and then I screwed the 2×4 to the cabinet from the inside to hold the weight. This was a 15 minute build and I’m not sure why I didn’t do it earlier.
-- steve, simple and effective woodworking---etsy.com/shop/SussmanWoodworking--