LumberJocks

crosscut sleds

  • Advertise with us
Project by Tugboater78 posted 04-05-2014 03:54 PM 886 views 1 time favorited 1 comment Add to Favorites Watch

Been needing to make one of these for a while and finally got around to it.

24”x30”
1/2 birch ply as base
2×4 scraps that have been well acclimated to the shop and were straight grained and stable for the fences.
back fence is spruce i think, the front fence is white pine 2 piece laminated together, blade guard is a SYP 2×6 scrap ( darker piece has been around for a while.)
miter guaides are ripped from a piece of oak flooring that were already perfectly sized for the slots

rubbed down with some BLO

while applying the BLO i found a surprise…

not sure how well it shows but it is a smiley face..

i got lucky or was very attuned with my Chi. When i first put the front fence on i got it dead on the first try according to my 5 cut method and my digital calipers.

my baby panel sled which i made first.. all i really had to do was mount a miter bar.. was a piece i made for a jig for my circular saw that didn’t work out.

-- Justin - the tugboat woodworker - " nothing changed me like the first shnick from a well sharpened, decent hand plane"





1 comment so far

View Jim Jakosh's profile

Jim Jakosh

11731 posts in 1793 days


#1 posted 04-11-2014 01:09 PM

That is a fine and handy tool!! Nice going!!............Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase