or Join Now!
16 foot shuffleboard table with storage underneath and hinged top so it can double as a work bench. I just poured the two part epoxy and then I will put the carpet on the “gutters”.
home | projects | blog
7 posts in 1079 days
Preview this project card
1111 posts in 2890 days
#1 posted 03-30-2014 05:50 AM
That is a cool table…are you going to show pic’s when it’s finished?
5499 posts in 2465 days
#2 posted 03-30-2014 09:13 PM
Cool piece, does it turn into a work bench also
-- Norman - I never never make a mistake, I just change the design.
#3 posted 03-31-2014 02:41 AM
I just poured the epoxy this weekend so in three days i should be shuffling. I do plan to use the top as a workbenchA long 16’ workbench. Should work good for the mitre saw.
#4 posted 03-31-2014 05:44 AM
The edge on the playing table…did you round it over or is it just the way it looks in the picture?
#5 posted 04-03-2014 02:25 AM
finally finished the table. Cleaned up the edges of the epoxy with a router and glued in the carpet tonight. Work great especially if you coat the playing surface with silicone before putting down the “sand”. Total cost about $400. Most expensive part was the 2 gallons of epoxy ($90). I used solid core doors for the playing surface. Let me know if you have any questions.
11362 posts in 1637 days
#6 posted 04-04-2014 02:04 PM
Great build, awesome design with a lot of uses. Great finish and colors. Great job!
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics