LumberJocks

Small Router Table

  • Advertise with us
Project by Notw posted 03-25-2014 08:28 PM 1168 views 7 times favorited 6 comments Add to Favorites Watch

Benchtop router table with fence and removable insert made out of 3/4” MDF, 1/4” MDF and scrap plywood. Not the prettiest table but it is flat, smooth and cuts wood. Inside the table is an old Black and Decker router that was handed down to me from my grandfather. The dust port on the back of the fence does a nice job at catching the huge amount of saw dust that is produced. Not a nice shiny new router but this is the one I keep mounted in the table, guess I am a little sentimental. The dust port on the back of the fence does a nice job at catching the huge amount of saw dust that is produced. Adjustable knobs and self adhesive measuring tape (added after pictures) make lining the fench up easy.





6 comments so far

View Larry's profile

Larry

14 posts in 693 days


#1 posted 03-25-2014 08:36 PM

I really like it. Are you planning on adding a split fence to the front of the current fence? Good job!

View Notw's profile

Notw

131 posts in 506 days


#2 posted 03-25-2014 08:45 PM

I doubt it, I actually made this about a year ago and I really want to make a table saw extension and clear up even more floor space. Once i make that one it will most likely have a split fence.

View Spacehog's profile

Spacehog

34 posts in 278 days


#3 posted 03-26-2014 12:54 PM

Very cool. I want to eventually make something like this for myself. Thanks for the pics!

-- Whatever your hand finds to do, do it with all your might...

View Richard's profile

Richard

1103 posts in 1443 days


#4 posted 03-26-2014 06:03 PM

It dosen’t have to be shiny an new if it does what it is supposed to do.

View bit101's profile

bit101

106 posts in 629 days


#5 posted 04-03-2014 02:39 PM

Looks good to me. I have a Skil router table. It looks nice and fancy, but the inset is done so poorly that you wind up pushing your stock over three different level surfaces to get to the blade. It kind of works for larger stock, but not for small stuff. So I’ve been thinking of making my own, something a lot like this.

View helluvawreck's profile

helluvawreck

16043 posts in 1619 days


#6 posted 04-03-2014 02:44 PM

It’s a nice addition to your shop. Congratulations.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase