|Project by Steve Kreins||posted 03-20-2014 09:46 PM||1563 views||2 times favorited||6 comments|
I built two stands today with wheels. One for my compound miter saw and one for my router table. Two of the wheels are locking on opposing sides. I used scrap 2×4s with 3/4 ply.I assembled everything with pocket screws which made life easy! I have very limited Man Cave space so I need to roll these in and out through a 32” door into my patio. They store neatly in one corner of my 100 sq ft shop and give me more room and less back aches.
I have two more to build, one for my scroll saw and one for my planner.
I have two roller stand extensions so I’m good to go when working long pieces.
I guess you might say I am creating a rock and roll workshop since I usually have some oldies going in the background. ;)
I may add shelves later, but right now I need to finish organizing my shop before I go into the hospital April 8th. I wont be making much saw dust for a few weeks after that.
-- I thank God for everything, especially all of you!