Simple Saw Blade Storage

  • Advertise with us
Project by steve_in_ohio posted 03-15-2014 12:18 PM 1368 views 2 times favorited 5 comments Add to Favorites Watch

This is a simple saw blade storage system that I made to store my table saw blades and chop saw blades. It is nothing more than a scrap piece of wood on the bottom that I drilled a hole for a 1/2” dowel to fit in (picture 2). Then I cut a bunch of 3” x 3” pieces of hardboard with a hole in it (picture 3) to keep the teeth of the saw blades from hitting each other.

-- steve, simple and effective

5 comments so far

View doubleDD's profile


4025 posts in 1134 days

#1 posted 03-15-2014 01:59 PM

Simple and effective. I have something similar. Good work.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View whitebeast88's profile


3971 posts in 1281 days

#2 posted 03-15-2014 02:47 PM

great thinking,and used of both worlds,useful and didn’t cost anything…..

-- Marty.Athens,AL

View Rick's profile


8287 posts in 2123 days

#3 posted 03-15-2014 09:08 PM

Very Nice Project. Well Executed. Thanks For Sharing.


-- Hope Everyone Is Doing Well! .... Best Regards: Rick

View Woodwrecker's profile


3769 posts in 2666 days

#4 posted 03-18-2014 02:34 AM

Good job Steve.
Handy item indeed.

-- Eric down in sunny Florida.

View Fishinbo's profile


11362 posts in 1266 days

#5 posted 03-21-2014 01:42 PM

Great idea, neat way to store the blades, very useful around the shop. Well done!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics