|Project by DMC1903||posted 03-10-2014 08:11 PM||1019 views||1 time favorited||7 comments|
I had some leftover Black Walnut and found a few nice pieces of Bubinga, the legs were cut than shaped with a rasp and files.
The joints are mortise and tenon.
For the finish, I choose to use Danish oil on the legs and apron,with plenty of wet sanding to fill the pores.The topcoat is arm a seal
The top has 4 layers of GF Arm-A-Seal, followed by several coats of wax to polish the finish.
Overall, it was a painless and fun project.