|Project by hotncold||posted 03-08-2014 03:17 AM||2466 views||15 times favorited||10 comments|
After completing the Miter Saw Station, I added the center drawers for saw blade storage. All shelves ride inside dados and the bottoms are just MDF. The blades are held in place with dowels and I drilled holes at the edge of the blade location to be able to remove the sharp blades easily.
The pulls are made from 2×4 blocks run through the router and painted with black lacquer. I like the contrast of the birch drawer fronts and the black drawer pulls.
The entire assembly was then mounted in the open center section of my recently constructed miter station.
-- Dennie - Tennessee - Every Pro was once an Amateur. Every Expert was once a Beginner. So dream Big and start Now!