or Join Now!
Hickory and Maple 10”* 5” tall 4” deep. Tung Oil and then bees wax. Red Cedar handle.
home | projects | blog
316 posts in 2555 days
Preview this project card
3188 posts in 891 days
#1 posted 02-28-2014 03:42 AM
Nice work. I like that wave look to it.
-- Dave, Downers Grove, Il. When you run out of ideas, start building your dreams
3090 posts in 672 days
#2 posted 02-28-2014 07:29 AM
Nicely done…thanks or sharing..
-- Dave.......Keep calm and make more sawdust....
748 posts in 3176 days
#3 posted 02-28-2014 07:50 AM
If i could offer a better method. The drawer rests on a very sharp edge which tends to get caught in the cabinet and makes the drawer more difficult to open. The solution is; prior to attaching the front of the drawer bandsaw a section from the drawer, of a reasonable size, say 1/2 an inch. Then glue that sawn section into the cabinet, making sure it is touching the back of the box. Then attach the front of the drawer. There is no loss of drawer space but the drawer opening will be smoother. And over time the drawer’s sharp edge will not chip or break.
Hope this helps?
-- Bandsawn Box Plans available at ~ http://www.tonyward.org
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics