|Project by Darell||posted 02-26-2014 09:20 PM||1114 views||2 times favorited||5 comments|
It’s been awhile since I’ve posted any projects so I thought I’d post a couple that I’m kind of proud of. The first is a bias bowl turned from plywood. The blank was about 4.5” square that I glued up from scrap baltic birch. It was turned mostly with EWT’s as the plywood dulled my Thompson bowl gouge very quickly. It is finished with gloss deft spray laquer.This one won me a blue ribbon at the Oklahoma State Fair last September. The second is a bowl that won second place. It’s turned from a piece of spalted hackberry. This one is finished with Mylands friction polish.
-- Darell, Norman, Ok.