LumberJocks Woodworking Forum banner

Project Information

This walnut wall cross is a Steve Good pattern but ,as always, I can't leave well enough alone. I cut it from 3/4 in. thick walnut instead of 1/4 in. thick like the plans call for. I then used a reclaimed tongue and groove board that's been kicking around the shop for the "stained glass" church window shaped back board. I cut 2 pieces, split one, then glued it to each side of the full board for a nice rustic look. To bring out the grain contrast i did a light sanding with 80 grit on an orbital palm sander.

Gallery

Comments

· Registered
Joined
·
165 Posts
wow, the cross turned out beautiful, great work
 

· Registered
Joined
·
5 Posts
Thank you :)
 

· Registered
Joined
·
3,876 Posts
Very Nice Project Indeed! Great Workmanship! Thanks For Sharing!

Rick
 

· Registered
Joined
·
122 Posts
Absolutely amaizing scrolling project.
 

· Registered
Joined
·
85 Posts
do you have a link to the pattern, i think it's great and would love to try it myself.
 
Top