LumberJocks

Site Screw Box

  • Advertise with us
Project by hooky posted 02-18-2014 12:59 PM 1846 views 19 times favorited 15 comments Add to Favorites Watch

I got fed up going out on site to install Kitchen cupboards and not being able to find anything,

So i made this suitcase like box with internal removable trays, it is all made from Plywood. The trays are 100mm square (4 inches) and 70mm tall (2 and 3/4 inches) I used suit case latches to hold the lid closed when carrying and an old kitchen cupboard handle. it works so well i might make a few more

I hope you all like this
Thanks, Hooky

-- Happiness is a way of travel , not a destination (Roy Goodman)





15 comments so far

View steve_in_ohio's profile

steve_in_ohio

1195 posts in 456 days


#1 posted 02-18-2014 01:20 PM

looks great, simple and effective, great job

-- steve, simple and effective woodworking---etsy.com/shop/SussmanWoodworking--

View Bobsboxes's profile

Bobsboxes

795 posts in 1509 days


#2 posted 02-18-2014 01:42 PM

Looks great, I got myself some large plastic organizers, a couple of years ago, that I can take with me. This setup sure gets you to a job with what you need and I am not dumping out a 3 # coffee can to find that last screw I need. The organizers worked so well, I built a compartmented shelf to hold them all. I emptied ten 3# coffee cans. Great helpful build.

-- Bob, Lewistown, Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View drbyte's profile

drbyte

605 posts in 2908 days


#3 posted 02-18-2014 01:54 PM

Very nice, efficient and functional! Have always liked building my own boxes for things like this. I must have 15 tool totes, hardware boxes and pipe fitting boxes/trays! Keep building them, you’ll never regret it! And they’re sturdy enough to stand on when you need a little extra height. They6 stack so well on hand trucks and carts too! No end of benefits!!!

-- Dennis, WV

View waho6o9's profile (online now)

waho6o9

5760 posts in 1422 days


#4 posted 02-18-2014 01:54 PM

Well done Hooky!

View John Stegall's profile

John Stegall

433 posts in 2362 days


#5 posted 02-18-2014 02:09 PM

Very good idea! I especially like the fact that they can be taken out as picture 3 shows.
beats the @#$^ out of my fishing tackle box which always manages to have a screw or two stuck somewhere to prevent closing.

-- jstegall

View SquintyPolock's profile

SquintyPolock

96 posts in 742 days


#6 posted 02-18-2014 04:36 PM

That is awesome!

-- It's all in a day's work...

View Diggerjacks's profile

Diggerjacks

1867 posts in 1984 days


#7 posted 02-18-2014 06:46 PM

Hello hooky

your project looks great, simple and effective.

I like it

THanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View Irishmike757's profile

Irishmike757

17 posts in 434 days


#8 posted 02-18-2014 08:39 PM

Very handy with the removeable trays. Excellent idea.

View Tommy's profile

Tommy

62 posts in 425 days


#9 posted 02-19-2014 01:16 AM

Great idea and implementation!!

-- Tommy

View BentheViking's profile

BentheViking

1757 posts in 1409 days


#10 posted 02-19-2014 01:28 AM

awesome. I used to install cabinets and I always was looking for a perfect hardware box. I’d get little plastic jewelry organizers which would work great for awhile until inevitably they’ed fall off the counter and smash all over the floor scattering hardware everywhere

-- It's made of wood. Real sturdy.--Chubbs Peterson

View Mip's profile

Mip

347 posts in 923 days


#11 posted 02-19-2014 02:16 AM

That is a good. I might have to steal this plan and make one of my own. I especially like how you made the compartments separate so you can lift each one out to get to the parts and not have to pinch in the corners.

View hooky's profile

hooky

361 posts in 2164 days


#12 posted 02-19-2014 10:05 AM

Thanks everyone for your comments, You are all welcome to copy as i made it up as i went along (so no copy write to worry about)

I agree with everyone who said that plastic ones or fishing boxes don’t work or break quickly ( i have several)

I sort of copied this from a screw box made as a metal case with plastic removable inserts (as these retail for $60 aus i couldnt afford to buy one)

Hooky

-- Happiness is a way of travel , not a destination (Roy Goodman)

View Ken90712's profile

Ken90712

15407 posts in 2034 days


#13 posted 02-19-2014 11:17 AM

Well done and great idea….

-- Ken, "Everyday above ground is a good day!"

View majuvla's profile

majuvla

4513 posts in 1713 days


#14 posted 02-20-2014 06:39 AM

Awsome organizer!

-- Ivan, Croatia, Wooddicted

View Fishinbo's profile

Fishinbo

11362 posts in 1021 days


#15 posted 02-24-2014 05:15 PM

Very functional build, a must have for those bits and pieces in the shop. Great job!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com