LumberJocks

Sanding station with fold-down down draft table done

  • Advertise with us
Project by Sawdustmaker posted 02-16-2014 04:07 PM 1578 views 6 times favorited 11 comments Add to Favorites Watch

I decided to make a rolling stand for my spindle Sander and all of my other individual finishing and belt sanders. The fold-down sanding table allows me to hook up a 2 1/2 inch line to either the vacuum or my dust collector. Now I need to make a third stand for my planer and then I will have a threesome.

-- Brian, Virginia Beach





11 comments so far

View helluvawreck's profile

helluvawreck

16904 posts in 1739 days


#1 posted 02-16-2014 04:12 PM

This will be a great addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View woodchuckerNJ's profile

woodchuckerNJ

963 posts in 507 days


#2 posted 02-16-2014 04:27 PM

Those holes in the peg board area way to small.
Even for a vac. But if you put a DC on that, you’ll starve it.

Figure 3/8 if you are using a DC and use a countersink to smooth the holes out.

-- Jeff NJ

View whitebeast88's profile

whitebeast88

3735 posts in 1063 days


#3 posted 02-16-2014 05:23 PM

very nice,looks to nice to be in the shop.great work!

-- Marty.Athens,AL

View tomakazi's profile

tomakazi

662 posts in 2156 days


#4 posted 02-16-2014 05:43 PM

WOW! Great idea! every shop could use something like this.

-- I didn't go to college, I was too busy learning stuff - Ted Nugent

View DocSavage45's profile

DocSavage45

5895 posts in 1715 days


#5 posted 02-16-2014 05:47 PM

I agree w/woodchuckerNJ about the hols. Won’t suck anything.

The rest of the station should be in your living room! Very nice piece of furniture!

-- Cau Haus Designs, Thomas J. Tieffenbacher

View redryder's profile

redryder

2294 posts in 1975 days


#6 posted 02-16-2014 07:40 PM

Nice project with storage for all the essentials….............

-- mike...............

View Sawdustmaker's profile

Sawdustmaker

287 posts in 2670 days


#7 posted 02-16-2014 07:50 PM

I might agree with your assumption IRT the dust collector, but the number of holes and their total area exceeds a 2.50 inch opening for the wet vac. In fact, when I connect the vacuum, there is NO change In the sound at all.

-- Brian, Virginia Beach

View Mike_from_Buffalo's profile

Mike_from_Buffalo

96 posts in 758 days


#8 posted 02-17-2014 01:40 PM

That is an awesome piece of shop furniture!

-- Mike from Buffalo "A man spends the first half of his life learning habits that shorten the other half of his life."

View fivecodys's profile

fivecodys

179 posts in 509 days


#9 posted 02-19-2014 12:38 AM

Wow Wow Wow!
That is very nice!
Good job!

-- Bill

View Fishinbo's profile

Fishinbo

11362 posts in 1048 days


#10 posted 02-21-2014 03:25 PM

Wow! Awesome build, too pretty to put in a workshop. Great shop table and drawers that will serve you well for a long time. Excellent job!

View JonBikeRacer's profile

JonBikeRacer

49 posts in 475 days


#11 posted 04-03-2015 06:41 PM

That’s too pretty for shop furniture… Some of my inside the house furniture isn’t as nice!

-- Jon "That's about as close as I can eyeball it"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com