LumberJocks

Who framed the dog?

  • Advertise with us
Project by degoose posted 02-07-2014 10:13 AM 1317 views 1 time favorited 32 comments Add to Favorites Watch

Started in the last few days… engraving from Photographs onto wood…
First is a dog pic download from the net… engraved on plywood and framed with Jarrah…
Second is a commission… and the first engraving ever
.... of a landscape of Milne Bay…. on Huon Pine…
Third is my third Number One grandson, on ply… no frame yet…
Fourth is first attempt at a car pic… a little light on….
Fifth is same as the fourth, a little darker.
Last is for the horse lovers out there…
Having lots of fun learning… not bad for a beginner…
The following are screen shots from CorelDraw and LaserCut 5.3

and here is the finished landscape…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...





32 comments so far

View Ken90712's profile

Ken90712

14947 posts in 1847 days


#1 posted 02-07-2014 11:50 AM

Degoose, great work my friend…. What a fun new woodworking skill to do. Hope all is well over there and from the looks of these cool projects they are just that. Keep up the great work buddy.

-- Ken, "Everyday above ground is a good day!"

View deon's profile

deon

2183 posts in 1683 days


#2 posted 02-07-2014 11:55 AM

Some amazing technology you have there

-- Dreaming patterns

View Monte Pittman's profile

Monte Pittman

14228 posts in 996 days


#3 posted 02-07-2014 12:19 PM

I not only love your work, I think it is great that you keep pushing to try different things. Great job sir.

-- Mother Nature created it, I just assemble it.

View 489tad's profile

489tad

2334 posts in 1669 days


#4 posted 02-07-2014 12:31 PM

I always blame the dog.

That is cool!

-- Dan, Naperville IL, I.G.N.

View BobWemm's profile

BobWemm

681 posts in 584 days


#5 posted 02-07-2014 12:55 PM

Those works are great, it is always fun to try something new. That keeps your brain working.
Congratulations.

Bob.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better.

View amagineer's profile

amagineer

1385 posts in 1255 days


#6 posted 02-07-2014 01:03 PM

The detail is amazing. Does the engraver have the ability to adjust the clarity of the picture? How long does it take per picture?
-don

-- Flaws are only in the eye of the artisan!

View Roger's profile

Roger

14608 posts in 1462 days


#7 posted 02-07-2014 02:10 PM

They all look much better than a regular picture.

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View stefang's profile

stefang

13057 posts in 1992 days


#8 posted 02-07-2014 02:10 PM

They are all nice including your cute little grandson Larry, but you get extra high marks on the horse portrait which I think is very arty.

-- Mike, an American living in Norway.

View jroot's profile

jroot

235 posts in 2180 days


#9 posted 02-07-2014 02:17 PM

Which engraver are you using? How expensive is it? What other tools does one need other than the engraver?

This is giving me all kinds of ideas. Thanks for sharing. I look forward to your responses.

-- jroot

View kevinw's profile

kevinw

180 posts in 2397 days


#10 posted 02-07-2014 02:22 PM

Great stuff. I like it and like others, I am curious for details about your equipment. One caution, is be sure that pix downloaded from the net, have the rights available for you to use. You probably know this already and were careful to be sure it was a legal usage, but this note is as much for the others that will check it out in case they don’t know. Keep up the nice work!

-- Kevin, Blue Springs, MO

View Jonathan's profile

Jonathan

2605 posts in 1708 days


#11 posted 02-07-2014 02:39 PM

Looking good Larry! Glad you’re constantly upping your game and continuing to explore.

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View patron's profile

patron

13034 posts in 1999 days


#12 posted 02-07-2014 02:40 PM

these look great larry
nice to see where and what you are up to again

they look like old cameos
in that brown tone style

any more
and they would just be pictures

and congrats
on your third
little lazy

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

#13 posted 02-07-2014 03:10 PM

I think Larry is referring to his laser engraver and not a carving tool.

Is that right?

-- Will trade wife's yarn for tools.

View a1Jim's profile

a1Jim

112104 posts in 2235 days


#14 posted 02-07-2014 04:11 PM

Cool

-- http://artisticwoodstudio.com Custom furniture

View LittlePaw's profile

LittlePaw

1571 posts in 1736 days


#15 posted 02-07-2014 04:24 PM

Do you mean you put all those dotsyour self, by hand using an engraver, or did you down load the picture into a electronic laser/CNC and the machine “print” out the picture on wood?

-- LittlePAW - The sweetest sound in my shop, next to Mozart, is what a hand plane makes slicing a ribbon.

showing 1 through 15 of 32 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase