LumberJocks

Maple Canister

  • Advertise with us
Project by cajunpen posted 02-07-2014 02:54 AM 883 views 0 times favorited 7 comments Add to Favorites Watch

This is a project started on my Ringmaster and finished on the Lathe. I like to avoid the tell tale plugs in the bottom of my Ringmaster projects when I can. I cut 4 rings from a piece of Maple and then took two more pieces of the same stock and turned a bottom and a lid. The pitiful attempt at a finial is a piece of Cocobolo I had lying around. The bottom and the top have been turned to fit into the canister (a rabbit I guess you could say). The wood was a little punky for some reason and I could not get a smooth finish on it – at least I didn’t think it was looking smooth, but it is smooth to the touch. It measures about 4 3/4” high and 3 3/4” wide.

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/





7 comments so far

View doubleDD's profile

doubleDD

4990 posts in 1437 days


#1 posted 02-07-2014 03:13 AM

Nice work. I too get that occasional tear out. Doesn’t a rabbit have 2 ears? LOL well done

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View CharlieM1958's profile

CharlieM1958

16228 posts in 3612 days


#2 posted 02-07-2014 03:21 AM

Very nice, Bill!

-- Charlie M. "Woodworking - patience = firewood"

View hoss12992's profile

hoss12992

3802 posts in 1287 days


#3 posted 02-07-2014 05:15 AM

Great job buddy

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View Monte Pittman's profile (online now)

Monte Pittman

21256 posts in 1732 days


#4 posted 02-07-2014 08:04 AM

Great work as always

-- Mother Nature created it, I just assemble it.

View Roger's profile

Roger

19594 posts in 2198 days


#5 posted 02-07-2014 02:06 PM

I like it. Very clean.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View luv2learn's profile

luv2learn

2389 posts in 1697 days


#6 posted 02-07-2014 04:49 PM

Bill, you did a great job combining the Ringmaster and the lathe to turn out this canister.

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View HillbillyShooter's profile

HillbillyShooter

5811 posts in 1686 days


#7 posted 02-07-2014 07:49 PM

Nice job.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com