or Join Now!
My first attempt at a wearable cross.
home | projects | blog
7 posts in 1080 days
Preview this project card
217 posts in 1474 days
#1 posted 02-03-2014 07:22 AM
Could you walk us through the process? I suspect it was rough cut on the bandsaw, and drilled and the scroll saw for the inside work…then lots of carving and sanding???
-- David, Norwood Mass, email@example.com
293 posts in 727 days
#2 posted 02-03-2014 01:40 PM
Yes, please let us know the process, and its size. Also, how it will hang.
#3 posted 02-10-2014 12:38 AM
the cross is about 4.5 cms tall, done with a detail pull saw, small gouges, carving knife, art scalpel and a little sanding at the end. I cut out the rough shape carved the edged with my knife, cut the holes with my small gouges and did some shaping with the scalpel and did some fine sanding to finish it. there is a hole drilled through the top of the cross so that it will hang as it is shown in the picture. I also put a coat of beeswax on it but I don’t have a picture of that sadly.
5811 posts in 1796 days
#4 posted 02-10-2014 12:43 AM
-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington
#5 posted 02-10-2014 12:50 AM
Really quite well done. Thanks for the extra information. Much appreciated.
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics